J-H(St)H…Lg FE180 PH120

Ürünler

J-H(St)H…Lg FE180 PH120

Data Sheet

Application

These halogen-free and flame retardant screened installation cables with twisted pairs on a fixed operating mode can continiue energy trans-mission under fire conditions. These cables are used for fire alarm systems, signal and data communications as an fixed indoor installations. And also screen provides protection against external pulses. Halogen-free cables are used in the closed environments, at schools, airports, hospitals, malls etc. where low corrosive gases and low smoke density must have in case of fire. These cables are used for indoor applications, not intended for outdoor or underground installation.

Cable Design

Conductor	:	Plain copper wire, solid
Insulation	:	Halogen-free elastomer comp., EN 50290-2-36
Core identification	:	VDE 0815
Pair twist	:	Two cores twisted to a pair
Stranding	:	Pairs stranded in layers of optimum pitch
Protective wrap	:	Fibre glass tape
Separator	:	Polyester tape
Screen	:	Aluminium polyester tape with tinned copper drain wire Drain wire; Ø : 0,40 mm ≤ 10 pairs Ø : 0,60 mm > 10 pairs
Outer sheath	:	HFFR compound, EN 50290-2-27
Sheath colour	:	~RAL 3000, Red

HFFR: Halogen-free flame retardant

* 2 pairs twisted as star-quad

Technical Data

Standard	:	Adapted acc. to VDE 0815 & TS 13767
Conductor resis. (loop)	:	Max. 130 Ω/km : Ø 0,60 mm~0,28 mm² Max. 73,2 Ω/km : Ø 0,80 mm~0,50 mm² Max. 46,8 Ω/km : Ø 1,00 mm~0,78 mm² Max. 36,9 Ω/km : Ø 1,13 mm ~ 0,2 mm² Max. 24,7 Ω/km :Ø 1,38 mm ~ 1,5 mm² Max. 15,1 Ω/km :Ø 1,76 mm ~ 2,5 mm²
Insulation resistance	:	Min. 100 MΩ.km
Mutual capacitance	:	Max. 120¹⁾ nF/km
Capacity Unbalanced	:	Max. 300²⁾ pF / 100 mt
Operating voltage	:	Max. 300 V
Test voltage (AC 50 Hz)	:	Core/core : 800 V Core/screen : 800 V
Temperature range	:	Fixed : - 30 ^oC ~ + 70^oC Installation : - 5 ^oC ~ + 50^oC
Min. bending radius	:	10 x D
Flame retardant test	:	EN 60332-1-2 & IEC 60332-1-2
Flame propagation test	:	EN IEC 60332-3-24 Cat C
Smoke density test	:	EN 61034-2 & IEC 61034-2
Halogen-free properties test	:	EN 60754-1/-2 & IEC 60754-1/-2
Fire resistance test Circuit integrity (FE180)	:	IEC 60331-23 (Uo: 110 V)
Fire resistance test (Fire with mechanical shock)	:	EN 50200; PH30 ~ PH120 (Uo: 110 V)
¹⁾ This value may be exceeded by 20% by cables with up to 4 pairs ²⁾ 20% of the values, at least one value up to 500 pF permitted

: Conform to 2014/35/EU (Low Voltage Directive)

Conform to 2011/65/EU & 2015/863 (RoHS Directives)

Cross Sections

Part- number	No. of pairs x Conductor Diameter	Approx. Outer Diameter	Copper Weight	Approx. Cable Weight
	(mm)	(mm)	(kg/km)	(kg/km)
1920 03 001	1x2x0,60+0,40	4,40	7	30
1920 03 002	2x2x0,60+0,40	4,90	12	41
1920 03 003	3x2x0,60+0,40	5,90	18	55
1920 03 004	4x2x0,60+0,40	6,50	23	66
1920 03 005	5x2x0,60+0,40	7,00	29	78
1920 03 006	6x2x0,60+0,40	7,90	34	95
1920 03 008	8x2x0,60+0,40	8,30	45	110

1920 04 001	1x2x0,80+0,40	5,40	11	43
1920 04 002	2x2x0,80+0,40	6,10	21	63
1920 04 003	3x2x0,80+0,40	7,60	31	88
1920 04 004	4x2x0,80+0,40	8,40	41	108
1920 04 005	5x2x0,80+0,40	9,20	51	128
1920 04 006	6x2x0,80+0,40	10,50	61	160
1920 04 008	8x2x0,80+0,40	11,00	81	186

1920 04 001	1x2x0,80+0,80	5,40	15	47
1920 04 002	2x2x0,80+0,80	6,10	25	67
1920 04 003	3x2x0,80+0,80	7,60	35	91
1920 04 004	4x2x0,80+0,80	8,40	45	112
1920 04 005	5x2x0,80+0,80	9,20	55	132
1920 04 006	6x2x0,80+0,80	10,50	65	164
1920 04 008	8x2x0,80+0,80	11,00	84	189

Part- number	No. of pairs x Conductor Diameter	Approx. Outer Diameter	Copper Weight	Approx. Cable Weight
	(mm²)	(mm)	(kg/km)	(kg/km)
1920 06 001	1x2x1+0,80	5,80	20	55
1920 06 002	2x2x1+0,80	6,50	35	82
1920 06 003	3x2x1+0,80	8,30	50	114
1920 06 004	4x2x1+0,80	9,20	66	141
1920 06 005	5x2x1+0,80	10,00	81	168
1920 06 006	6x2x1+0,80	11,50	96	210
1920 06 008	8x2x1+0,80	12,50	126	260

1920 07 001	1x2x1,13+0,80	6,00	24	62
1920 07 002	2x2x1,13+0,80	6,80	44	93
1920 07 003	3x2x1,13+0,80	8,60	63	131
1920 07 004	4x2x1,13+0,80	9,60	82	164
1920 07 005	5x2x1,13+0,80	10,50	102	196
1920 07 006	6x2x1,13+0,80	12,40	121	258
1920 07 008	8x2x1,13+0,80	13,10	160	305

1920 08 001	1x2x1,38+0,80	7,00	34	81
1920 08 002	2x2x1,38+0,80	8,00	63	128
1920 08 003	3x2x1,38+0,80	10,30	91	182
1920 08 004	4x2x1,38+0,80	11,60	120	230
1920 08 005	5x2x1,38+0,80	13,10	149	292
1920 08 006	6x2x1,38+0,80	15,00	178	365
1920 08 008	8x2x1,38+0,80	15,80	236	432

*Diameter tolerance: ± %7

**Please ask for other cross-sections

Ürünler