JE-H(St)H…Bd (Z) FE180 PH120

Ürünler

JE-H(St)H…Bd (Z) FE180 PH120

Data Sheet

Application

These halogen-free and flame retardant screened installation cables with twisted pairs on a fixed operating mode can continiue energy trans-mission under fire conditions. These cables are used in instrumentation and control engineering; in communication and automation systems, safety and fire alarm systems, data and signal transmission in electronic purposes. And also screen provides protection against external electrical interferences. Halogen-free cables are used in the closed environments, at schools, airports, hospitals, malls etc. where low corrosive gases and low smoke density must have in case of fire. With blue sheath it is suitable for intrinsically safe systems. With blue sheath it is suitable for intrinsically safe systems. These cables are used for indoor applications, not intended for outdoor or underground installation.

Cable Design

Conductor	:	Plain copper wire, solid
Insulation	:	Halogen-free elastomer comp., EN 50290-2-36
Core identification	:	VDE 0815; (Table-1)
Pair twist	:	Two cores twisted to a pair
Bundle	:	Four pairs twisted to a bundle
Bundle identification	:	Each bundle with numbered tape (Z); (> 4 pairs)
Stranding	:	Bundles stranded in layers of optimum pitch
Protective wrap	:	Fibre glass tape
Separator	:	Polyester tape
Screen	:	Aluminium polyester tape with tinned copper drain wire
Outer sheath	:	HFFR compound, EN 50290-2-27
Sheath colour	:	~RAL 2003, Orange

HFFR: Halogen-free flame retardant

Z: The bundles are marked by means of a numbered helix.

Technical Data

Standard	:	Adapted acc. to VDE 0815 & TS 13767
Conductor resis. (loop)	:	Max. 130 Ω/km : Ø 0,60 mm~0,28 mm² Max. 73,2 Ω/km : Ø 0,80 mm~0,50 mm² Max. 46,8 Ω/km : Ø 1,00 mm~0,78 mm² Max. 36,9 Ω/km : Ø 1,13 mm ~ 1,0 mm² Max. 24,7 Ω/km :Ø 1,38 mm ~ 1,5 mm² Max. 15,1 Ω/km :Ø 1,76 mm ~ 2,5 mm²
Insulation resistance	:	Min. 100 MΩ.km
Mutual capacitance	:	Max. 120¹⁾ nF/km
Capacity Unbalanced	:	Max. 200²⁾ pF / 100 mt
Operating voltage	:	Max. 225 V
Test voltage (AC 50 Hz)	:	Damar/damar : 500 V Damar/ekran : 2000 V
Temperature range	:	Fixed : - 30 ^oC ~ + 80^oC Flexible : - 5 ^oC ~ + 50^oC
Min. bending radius	:	7,5 x D
Flame retardant test	:	EN 60332-1-2 & IEC 60332-1-2
Flame propagation test	:	EN IEC 60332-3-24 Cat C
Smoke density test	:	EN 61034-2 & IEC 61034-2
Halogen-free properties test	:	EN 60754-1/-2 & IEC 60754-1/-2
Fire resistance test Circuit integrity (FE180)	:	IEC 60331-23 (Uo: 110 V)
Fire resistance test (Fire with mechanical shock)	:	EN 50200; PH30 ~ PH120 (Uo: 110 V)
¹⁾ This value may be exceeded by 20% by cables with up to 4 pairs ²⁾ 20% of the values, at least one value up to 400 pF permitted

: Conform to 2014/35/EU (Low Voltage Directive)

Conform to 2011/65/EU & 2015/863 (RoHS Directives)

Cross Sections

Part- number	No. of pairs x Conductor Diameter	Approx. Outer Diameter	Copper Weight	Approx. Cable Weight
	(mm)	(mm)	(kg/km)	(kg/km)
1921 03 001	1x2x0,60+0,60	5,30	8	39
1921 03 002	2x2x0,60+0,60	5,80	14	51
1921 03 003	3x2x0,60+0,60	6,90	19	66
1921 03 004	4x2x0,60+0,60	7,90	25	81
1921 03 008	8x2x0,60+0,60	11,00	47	147
1921 03 012	12x2x0,60+0,60	13,30	69	200

1921 04 001	1x2x0,80+0,80	5,70	15	48
1921 04 002	2x2x0,80+0,80	6,40	25	67
1921 04 003	3x2x0,80+0,80	7,90	35	90
1921 04 004	4x2x0,80+0,80	8,70	45	110
1921 04 008	8x2x0,80+0,80	12,60	84	214
1921 04 012	12x2x0,80+0,80	14,80	124	274

1921 06 006	1x2x1+0,80	6,50	20	60
1921 06 006	2x2x1+0,80	7,30	35	88
1921 06 006	3x2x1+0,80	9,30	50	121
1921 06 006	4x2x1+0,80	10,30	66	150

1921 07 006	1x2x1,13+0,80	6,70	24	67
1921 07 006	2x2x1,13+0,80	7,60	44	99
1921 07 006	3x2x1,13+0,80	9,20	63	134
1921 07 006	4x2x1,13+0,80	10,70	82	170

1921 08 006	1x2x1,38+0,80	7,50	34	83
1921 08 006	2x2x1,38+0,80	8,60	63	129
1921 08 006	3x2x1,38+0,80	11,00	91	182
1921 08 006	4x2x1,38+0,80	12,60	120	240

1921 09 006	1x2x1,76+0,80	8,90	52	116
1921 09 006	2x2x1,76+0,80	10,30	99	188
1921 09 006	3x2x1,76+0,80	12,70	146	267
1921 09 006	4x2x1,76+0,80	15,40	193	362

Basic colours for pairs – Table-1

Pair	1.		2.		3.		4.
Core	a	b	a	b	a	b	a	b
Basic colour	blue	red	grey	yellow	green	brown	white	black

* Each bundle made up of 4 pairs.

** Cables with 2 pairs laid up as a star quad.

*** The bundles are identified by numbered tapes (Z)

**** Ring colours are avaible acc. to request

*Diameter tolerance: ± %7

**Please ask for other cross-sections

Ürünler