J-H(St)H Bd.../ Fire

Ürünler

Data Sheet

Application

These halogen-free and flame retardant screened installation twisted pairs alarm cables are used for signal, data communications and application for telecomunication as an fixed indoor installations. And also screen provides protection against external electrical interferences. Halogen-free cables are used in the closed environments, at schools, airports, hospitals, malls etc. where low corrosive gases and low smoke density must have in case of fire. These cables are used for indoor applications, not intended for outdoor or underground installation.

Cable Design

Conductor	:	Plain copper wire, solid
Insulation	:	HFFR compound, EN 50290-2-26
Core identification	:	VDE 0815, coloured cores
Pair twist	:	Two cores twisted to a pair
Bundle	:	Four pairs twisted to a bundle
Bundle identification	:	Each bundle with numbered tape
Stranding	:	Bundles stranded in layers of optimum pitch
Separator	:	Polyester tape
Screen	:	Aluminium polyester tape with tinned copper drain wire
Outer sheath	:	HFFR compound, EN 50290-2-27
Sheath colour	:	~RAL 3000, Red

HFFR: Halogen-free flame retardant

Technical Data

Standard	:	Adapted acc. to VDE 0812 & TS 13755
Conductor resis. (loop)	:	Max. 130 Ω/km : Ø 0,60 mm~0,28 mm² Max. 73,2 Ω/km : Ø 0,80 mm~0,50 mm² Max. 46,8 Ω/km : Ø 1,00 mm~0,78 mm² Max. 36,9 Ω/km : Ø 1,13 mm ~ 1,0 mm² Max. 24,7 Ω/km :Ø 1,38 mm ~ 1,5 mm² Max. 15,1 Ω/km :Ø 1,76 mm ~ 2,5 mm²
Insulation resistance	:	Min. 100 MΩ.km (≤ Ø 0,80mm) Min. 20 MΩ.km (> Ø 0,80mm)
Mutual capacitance	:	Max. 100¹⁾ nF/km (≤ Ø 0,80mm) Max. 120¹⁾ nF/km (> Ø 0,80mm)
Capacity Unbalanced	:	Max. 300²⁾ pF / 100 mt
Operating voltage	:	Max. 300 V
Test voltage (AC 50 Hz)	:	Damar/damar : 800 V Damar/ekran : 800 V
Temperature range	:	Fixed : - 30 ^oC ~ + 70^oC Flexible : - 5 ^oC ~ + 50^oC
Min. bending radius	:	10 x D
Flame retardant test	:	EN 60332-1-2 & IEC 60332-1-2
Flame propagation test	:	EN IEC 60332-3-24 Cat C
Smoke density test	:	EN 61034-2 & IEC 61034-2
Halogen-free properties test	:	EN 60754-1/-2 & IEC 60754-1/-2
¹⁾ This value may be exceeded by 20% by cables with up to 4 pairs ²⁾ 20% of the values, at least one value up to 400 pF permitted

: Conform to 2014/35/EU (Low Voltage Directive)

Conform to 2011/65/EU & 2015/863 (RoHS Directives)

Cross Sections

Part- number	No. of pairs x Conductor Diameter	Approx. Outer Diameter	Copper Weight	Approx. Cable Weight
	(mm)	(mm)	(kg/km)	(kg/km)
1958 04 001	1x2x0,80+0,40	5,40	11	40
1958 04 001	1x2x0,80+0,80	5,40	15	44
1958 04 002	2x2x0,80+0,40	6,10	21	59
1958 04 002	2x2x0,80+0,80	6,10	25	63
1958 04 004	4x2x0,80+0,80	8,40	45	105
1958 04 008	8x2x0,80+0,80	11,00	85	180
1958 06 001	1x2x1+0,80	5,80	20	52
1958 06 001	1x2x1+1	5,80	22	55
1958 06 002	2x2x1+0,80	6,50	35	77
1958 06 002	2x2x1+1	6,50	38	80
1958 07 001	1x2x1,13+0,80	6,00	24	62
1958 07 002	2x2x1,13+0,80	6,80	44	93
1958 08 001	1x2x1,38+0,80	7,00	34	77
1958 08 001	1x2x1,38+1	7,00	36	81
1958 08 001	1x2x1,38+1,38	7,00	43	87
1958 08 002	2x2x1,38+0,80	8,00	63	121
1958 08 002	2x2x1,38+1,38	8,00	72	132
1958 09 001	1x2x1,76+0,80	8,20	52	107
1958 09 001	1x2x1,76+1,76	9,20	70	131
1958 09 002	2x2x1,76+0,80	9,40	99	176
1958 09 002	2x2x1,76+1,76	10,40	117	200

*Diameter tolerance: ± %7

**Please ask for other cross-sections

Ürünler

J-H(St)H Bd.../ Fire

Data Sheet

Application

Kalite Belgeleri

Cross Sections