JE-HH…Bd FE180 PH120

Ürünler

Data Sheet

Application

These halogen-free and flame retardant installation cables with twisted pairs on a fixed operating mode can continiue energy transmission under fire conditions. These cables are used in instrumentation and control engineering; in communication and automation systems, safety and fire alarm systems, data and signal transmission in electronic purposes. Halogen-free cables are used in the closed environments, at schools, airports, hospitals, malls etc. where low corrosive gases and low smoke density must have in case of fire.These cables are used for indoor applications, not intended for outdoor or underground installation.

Cable Design

Conductor	:	Plain copper wire, solid
Insulation	:	Halogen-free elastomer comp., EN 50290-2-36
Core identification	:	VDE 0815; (Table-1)
Pair twist	:	Two cores twisted to a pair
Bundle	:	Four pairs twisted to a bundle
Bundle identification	:	Each bundle with numbered tape (Z); (> 4 pairs)
Stranding	:	Bundles stranded in layers of optimum pitch
Protective wrap	:	Fibre glass tape
Separator	:	Polyester tape
Outer sheath	:	HFFR compound, EN 50290-2-27
Sheath colour	:	~RAL 2003, Orange

HFFR: Halogen-free flame retardant

Z: The bundles are marked by means of a numbered helix.

Technical Data

Standard	:	Adapted acc. to VDE 0815 & TS 13767
Conductor resis. (loop)	:	Max. 130 Ω/km : Ø 0,60 mm~0,28 mm² Max. 73,2 Ω/km : Ø 0,80 mm~0,50 mm² Max. 46,8 Ω/km : Ø 1,00 mm~0,78 mm² Max. 36,9 Ω/km : Ø 1,13 mm ~ 1,0 mm² Max. 24,7 Ω/km :Ø 1,38 mm ~ 1,5 mm² Max. 15,1 Ω/km :Ø 1,76 mm ~ 2,5 mm²
Insulation resistance	:	Min. 100 MΩ.km
Mutual capacitance	:	Max. 100¹⁾ nF/km
Capacity Unbalanced	:	Max. 200²⁾ pF / 100 mt
Operating voltage	:	Max. 225 V
Test voltage (AC 50 Hz)	:	Damar/damar : 500 V Damar/ekran : 2000 V
Temperature range	:	Fixed : - 30 ^oC ~ + 80^oC Flexible : - 5 ^oC ~ + 50^oC
Min. bending radius	:	7,5 x D
Flame retardant test	:	EN 60332-1-2 & IEC 60332-1-2
Flame propagation test	:	EN IEC 60332-3-24 Cat C
Smoke density test	:	EN 61034-2 & IEC 61034-2
Halogen-free properties test	:	EN 60754-1/-2 & IEC 60754-1/-2
Fire resistance test Circuit integrity (FE180)	:	IEC 60331-23 (Uo: 110 V)
Fire resistance test (Fire with mechanical shock)	:	EN 50200; PH30 ~ PH120 (Uo: 110 V)
¹⁾ This value may be exceeded by 20% by cables with up to 4 pairs ²⁾ 20% of the values, at least one value up to 400 pF permitted

: Conform to 2014/35/EU (Low Voltage Directive)

Conform to 2011/65/EU & 2015/863 (RoHS Directives)

Cross Sections

Part- number	No. of pairs x Conductor Diameter	Approx. Outer Diameter	Copper Weight	Approx. Cable Weight
	(mm)	(mm)	(kg/km)	(kg/km)
1933 03 001	1x2x0,60	5,20	6	34
1933 03 002	2x2x0,60	5,60	11	46
1933 03 003	3x2x0,60	6,80	16	61
1933 03 004	4x2x0,60	7,80	22	76

1933 04 001	1x2x0,80	5,60	10	41
1933 04 002	2x2x0,80	6,30	20	60
1933 04 003	3x2x0,80	7,80	30	82
1933 04 004	4x2x0,80	8,60	40	102

1933 06 006	1x2x1	6,40	15	53
1933 06 006	2x2x1	7,20	30	80
1933 06 006	3x2x1	9,20	46	114
1933 06 006	4x2x1	10,20	61	141

1933 07 006	1x2x1,13	6,60	19	60
1933 07 006	2x2x1,13	7,50	39	91
1933 07 006	3x2x1,13	9,10	60	128
1933 07 006	4x2x1,13	10,60	78	162

1933 08 006	1x2x1,38	7,40	29	76
1933 08 006	2x2x1,38	8,50	58	122
1933 08 006	3x2x1,38	10,90	87	173
1933 08 006	4x2x1,38	12,50	116	231

1933 09 006	1x2x1,76	8,80	47	109
1933 09 006	2x2x1,76	10,20	94	180
1933 09 006	3x2x1,76	12,60	141	260
1933 09 006	4x2x1,76	15,30	188	354

Basic colours for pairs – Table-1

Pair	1.		2.		3.		4.
Core	a	b	a	b	a	b	a	b
Basic colour	blue	red	grey	yellow	green	brown	white	black

* Each bundle made up of 4 pairs.

** Cables with 2 pairs laid up as a star quad.

*** The bundles are identified by numbered tapes (Z)

**** Ring colours are avaible acc. to request

*Diameter tolerance: ± %7

**Please ask for other cross-sections

Ürünler