JE-H(St)HRH…Bd FE180 PH120

Ürünler

JE-H(St)HRH…Bd FE180 PH120

Data Sheet

Application

These halogen-free and flame retardant screened and armoured installation cables with twisted pairs on a fixed operating mode can continiue energy transmission under fire conditions. These cables are used in instrumentation and control engineering; in communication and automation systems, safety and fire alarm systems, data and signal transmission in electronic purposes. And also screen provides protection against external electrical interferences. Halogen-free cables are used in the closed environments, at schools, airports, hospitals, malls etc. where low corrosive gases and low smoke density must have in case of fire. The armour protects the cable from mechanical shocks. They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits..

Cable Design

Conductor	:	Plain copper wire, solid
Insulation	:	Halogen-free elastomer comp., EN 50290-2-36
Core identification	:	VDE 0815; (Table-1)
Pair twist	:	Two cores twisted to a pair
Bundle	:	Four pairs twisted to a bundle
Bundle identification	:	Each bundle with numbered tape (Z); (> 4 pairs)
Stranding	:	Bundles stranded in layers of optimum pitch
Protective wrap	:	Fibre glass tape
Separator	:	Polyester tape
Screen	:	Aluminium polyester tape with tinned copper drain wire
Inner sheath	:	HFFR compound, EN 50290-2-27, Turuncu
Armour	:	Galvenised steel wires braiding,~85% coverage
Outer sheath	:	HFFR compound, EN 50290-2-27
Sheath colour	:	~RAL 9005, Black or ~RAL 3000, Red

HFFR: Halogen-free flame retardant

Z: The bundles are marked by means of a numbered helix.

Technical Data

Standard	:	Adapted acc. to VDE 0812 & TS 13755
Conductor resis. (loop)	:	Max. 130 Ω/km : Ø 0,60 mm~0,28 mm² Max. 73,2 Ω/km : Ø 0,80 mm~0,50 mm² Max. 46,8 Ω/km : Ø 1,00 mm~0,78 mm² Max. 36,9 Ω/km : Ø 1,13 mm ~ 1,0 mm² Max. 24,7 Ω/km :Ø 1,38 mm ~ 1,5 mm² Max. 15,1 Ω/km :Ø 1,76 mm ~ 2,5 mm²
Insulation resistance	:	Min. 100 MΩ.km
Mutual capacitance	:	Max. 120¹⁾ nF/km
Capacity Unbalanced	:	Max. 200²⁾ pF / 100 mt
Operating voltage	:	Max. 225 V
Test voltage (AC 50 Hz)	:	Damar/damar : 500 V Damar/ekran : 2000 V
Temperature range	:	Fixed : - 30 ^oC ~ + 80^oC Flexible : - 5 ^oC ~ + 50^oC
Min. bending radius	:	10 x D
Flame retardant test	:	EN 60332-1-2 & IEC 60332-1-2
Flame propagation test	:	EN IEC 60332-3-24 Cat C
Smoke density test	:	EN 61034-2 & IEC 61034-2
Halogen-free properties test	:	EN 60754-1/-2 & IEC 60754-1/-2
Fire resistance test Circuit integrity (FE180)	:	IEC 60331-23 (Uo: 110 V)
Fire resistance test (Fire with mechanic shock)	:	EN 50200; PH30 ~ PH120 (Uo: 110 V)
¹⁾ This value may be exceeded by 20% by cables with up to 4 pairs ²⁾ 20% of the values, at least one value up to 400 pF permitted

: Conform to 2014/35/EU (Low Voltage Directive)

Conform to 2011/65/EU & 2015/863 (RoHS Directives)

Cross Sections

Part- number	No. of pairs x Conductor Diameter	Approx. Outer Diameter	Copper Weight	Approx. Cable Weight
	(mm)	(mm)	(kg/km)	(kg/km)
1922 04 001	1x2x0,80+0,80	9,40	15	165
1922 04 002	2x2x0,80+0,80	10,20	25	185
1922 06 001	1x2x1+0,80	10,30	20	180
1922 06 002	2x2x1+0,80	11,10	35	210
1922 08 001	1x2x1,38+0,80	11,30	34	220
1922 08 002	2x2x1,38+0,80	12,40	63	260

Basic colours for pairs – Table-1

Pair	1.		2.		3.		4.
Core	a	b	a	b	a	b	a	b
Basic colour	blue	red	grey	yellow	green	brown	white	black

* Each bundle made up of 4 pairs.

** Cables with 2 pairs laid up as a star quad.

*** The bundles are identified by numbered tapes (Z)

**** Ring colours are avaible acc. to request

*Diameter tolerance: ± %7

**Please ask for other cross-sections

Ürünler