LIH(St)H FE180 PH120

Ürünler

Data Sheet

Application

These halogen-free and flame retardant screened flexible control and connecting cables on a fixed operating mode can continiue energy transmission under fire conditions. These cables are used in instrumentation and control engineering; in communication and automation systems, data and signal transmission in electronic purposes. And also screen provides protection against external electrical interferences. Halogen-free cables are used in the closed environments, at schools, airports, hospitals, malls etc. where low corrosive gases and low smoke density must have in case of fire. These cables are used for indoor applications, not intended for outdoor or underground installation.

Cable Design

Conductor	:	Flexible plain copper wires, EN 60228 Class 5
Insulation	:	Halogen-free elastomer compound, EN 50290-2-36
Core identification	:	- According to DIN 47100 colour coded - OZ: Black cores with white numbers acc. to EN 50334 - JZ: Black cores with white numbers and a green-yellow core acc. to EN 50334
Stranding	:	Cores stranded in layers of optimum pitch
Protective wrap	:	Fibre glass tape
Separator	:	Polyester tape
Screen	:	Aluminium polyester tape with tinned copper drain wire ≥ 0,22 mm² : 0,22 mm² (7x0,20 mm) drain wire ≥ 0,75 mm² : 0,50 mm² (7x0,30 mm) drain wire
Outer sheath	:	HFFR compound, EN 50290-2-27
Sheath colour	:	~RAL 2003, Orange

HFFR: Halogen-free flame retardant

Technical Data

Standard	:	Acc. to VDE 0812 & TS 13734
Insulation resistance	:	< 0,50 mm² : Min. 200 MΩ.km ≥ 0,50 mm² : Min. 20 MΩ.km
Mutual capacitance	:	Max. 150 nF/km
Operating voltage	:	< 0,50 mm² : 250 V ≥ 0,50 mm² : U_o/U : 300/500 V
Test voltage (AC 50 Hz)	:	< 0,50 mm² : 1200 V ≥ 0,50 mm² : 2000 V
Temperature range	:	Fixed : - 30 ^oC ~ + 80^oC Flexible : - 5 ^oC ~ + 50^oC
Min. bending radius	:	Fixed :10 x D Flexible : 15 x D
Flame retardant test	:	EN 60332-1-2 & IEC 60332-1-2
Flame propagation test	:	EN IEC 60332-3-24 Cat C
Smoke density test	:	EN 61034-2 & IEC 61034-2
Halogen-free properties test	:	EN 60754-1/-2 & IEC 60754-1/-2
Fire resistance test Circuit integrity (FE180)	:	IEC 60331-23
Fire resistance test (Fire with mechanical shock)	:	EN 50200; PH30 ~ PH120

: Conform to 2014/35/EU (Low Voltage Directive)

Conform to 2011/65/EU & 2015/863 (RoHS Directives)